SRX-Rei are particles containing with a reactive group that can bind with formaldehyde, with the mechanism for neutralizing formaldehyde into harmless substances.
Activated carbon or carbon which is called “porous material”, deodorize by capturing formaldehyde into the porous. General deodorant, deodorize by using stronger smell to wrap the odor substance, which is called “masking agent”.
Both of them do not neutralize or disassemble the substance itself, formaldehyde will be release again over time.
In comparison, SRX-Rei has a function to neutralize the adsorbed formaldehyde, it is no need to worry about the re-dissipating.
Deodorize for a while by capturing formaldehyde into the porous. Without neutralizing or disassembling the substance itself, formaldehyde will be release again over time.
Deodorize temporary by using stronger smell to wrap the odor substance, but the smell will return in a relatively short period of time.
The nano-sized particles of SRX-Rei are so small that it can tightly enter into the small gap of substance.
After coating on the walls with SRX-Sei, most of the SRX-Rei remains on the wall even wipe it later. It can maintain the effect of adsorption and neutralization with formaldehyde.
In order to maintain the effect, it is necessary for those chemical adsorbent to maintain a low acidity. But that would be re-act and generate toxic gases with the alkaline substances such as painting, concrete, calcium silicate ceiling material in the interiors decoration. And it will also corrode metal, so please handle it carefully.
In this respect, SRX-Rei is neutral, no need to worry about the reaction with such alkaline material and metal corrosion, so you can use it at ease.
High polymer adsorbent, such as graft polymerization, its viscosity is so high that dust in the air is easy to stick on the coating surface.
Since only the fine particles of SRX-Rei remain on the coating materials, there is absolutely no stickiness. The appearance is clean. Dust does not interfere with the adsorption of formaldehyde.
Most of the water-soluble reactive group adsorbents are wet suction captures types, both water vapor and formaldehyde would be captured at the same time, on which produces little effect under low humidity.
However, the adsorption performance of SRX-Rei, without being influenced by the humidity, is stable even under low humidity.
Simply spray on the curtains, bed, the bottom of sofa, furniture and closet etc. then it can neutralize formaldehyde effectively.
Furniture, curtains, the bottom of the bed or sofa, closet, and car etc.
It is effective that simply put it in a closed space or inside the automobiles. It is also effective just put it around our living space.
Interior, such as living-room, bedroom. Large furniture or closet, automobile, desk in the office, etc.
Just lay the paper and the formaldehyde would be neutralized. It can also be used as a packaging material for clothing or other industrial products.
Costume closet, packaging paper for baby clothes or other industrial products, such as curing material or release paper of the resin sheet.
Bulk type for spraying or coating construction application. It will create an invisible film to adsorb formaldehyde for a lot of materials.
Interior finish materials, the base material, integrated materials, tile, concrete, fabric, carpet, packing materials and buffered paper of furniture, cardboard, etc.
Simplify the work and save the time by coating or spraying on the decoration material, wallpaper, painted surfaces, etc. during the construction.
Also it is possible to use an additive type such as painting or muddy paint, without increasing the process, as a measure for formaldehyde and odors.
Over coating on the finishing material
Coating on the solid wood or underlying materialFor those equipped furniture or closet, it is a good formaldehyde measure to spray or coat on it before shipments in the factory. Simply install the furniture after arriving at site.
Spray on the raw materials
Coating on the semi-finished products and all kinds of componentsAdhesive, using in the manufacture of composite panels and polaroid board, contains formaldehyde. Formaldehyde is vaporized and released slowly. BY coating SRX-Rei on the integrated material, the vaporized formaldehyde could be neutralized and reduced the amount of emission. This mechanism is also effective for those insulation materials or phenol resin that used formaldehyde as catalyst.
Neutralizing the dissipated formaldehyde by SRX-Rei“BOKEN Quality Evaluation Institute” conducted testing on comparative experiments between the furniture coated with SRX and without SRX. After thirty minutes, the result showed that the concentration of formaldehyde in the raw material was 119μg/㎡, while the material coated with SRX-Rei is 21.9μg/ ㎥, which reduced to about 18.4%.
Analysis and test report